Bullhead City Brake Repair
Quality Brake Services in Bullhead City
The moment you step on the brake pedal, you expect your vehicle to come to a stop. But, if your brake system needs service, you may find yourself struggling to bring your vehicle to a halt. At Tire Works, we understand the importance of retaining your brake system’s performance, which is why we go to such great lengths to ensure your vehicle retains its stopping power.
Whether you're coming to our Bullhead City auto shop for a routine brake pad replacement, or if you suspect you may need brake repair services, we encourage you to schedule an appointment at Tire Works for trustworthy and affordable brake repair in Bullhead City, AZ.
How to Tell If You Need Brake Repair
If your vehicle needs brake pad replacement or perhaps brake repair services, it may already be telling you through signs and symptoms.
Here are a few different signs that it may be time to bring your vehicle in for brake service:
Squeaking
Excess squeaking when you apply the brakes is a sign that your brake pads have worn thin. Your brake pads feature unique wear bars inside of them that are designed to squeak when they make contact with your rotor. When you hear a squeaking, this is often a sign that it is time for your brake pads to be replaced.
Grinding
It is never a normal sign when you apply the brakes, and you hear grinding noises. Grinding noises are often a sign that metal is coming into contact with metal in a way that it was not designed to do. If you hear grinding noises, we recommend scheduling an appointment at our service center at your earliest convenience.
Vibrations
Vibrations from your brake system are often a result of your brake rotors overheating and warping. Your brake rotors can sometimes overheat if you apply the brakes too often or during emergency braking from high speeds. Unfortunately, once your rotors have warped, they must be replaced to maintain your brake system performance.
Brake Pedal Problems
Some drivers report a squishy brake panel with little to no feedback. Other drivers have reported their brake pedal traveling to the floor and their vehicle still not coming to a stop. This is often a sign that there are issues with your master cylinder, or there are contaminants in your brake system. If this has happened to you, we encourage you to schedule an appointment at Tire Works as soon as possible for quality brake repair in Bullhead City, AZ.
Stop With Confidence with Quality Brake Services
At Tire Works, we don't only perform trustworthy brake repair, but we also help minimize the chances of brake issues with quality brake service. Our mechanics are here to provide all of the brake-related services that your vehicle will ever need and ensure that it always retains its stopping power. Here are just a few of the many services that our experts provide:
- Brake pad replacement
- Brake rotor replacement
- Master cylinder repair
- Brake fluid flush
- Brake rotor resurfacing services
Schedule an Appointment at Tire Works Today
At Tire Works, it doesn't matter if your vehicle requires quality brake repair services or if it needs routine brake maintenance services, you've come to the right place. Each of our mechanics is ASE-certified and uses high-quality replacement parts to ensure that your vehicle retains its stopping power. Our brake shop also provides money-saving service coupons that allow you to enjoy quality brake service at amazing prices.
Schedule an appointment at Tire Works today and trust our experts for quality brake repair in Bullhead City, AZ.
Bullhead City Brakes FAQs
What are the signs of worn brake pads?
Your car will offer several clues that it's time to replace your brake pads. Some are subtle, while others will demand your immediate attention. Here are some common warning signs:
- Visible wear: Look through your wheel spokes. If the brake pad material looks less than a quarter-inch thick, it's time for a professional inspection.
- Screeching or squealing: Brake pads have built-in wear indicators that make a high-pitched noise when they get thin, signaling it's time for service.
- Slow stopping: If your car seems less responsive when braking, it may be due to worn pads or a potential brake fluid leak.
- Vibrations: Pulsations in your brake pedal or steering wheel when you brake can indicate worn pads or damaged rotors.
- Brake fluid leaks: Check for fluid puddles under your car after it's been parked — a fresh, oily liquid could be brake fluid.
- Grinding noises: If you've missed the earlier warnings, a heavy grinding noise means the pads are completely gone, causing metal-on-metal damage. Get this repaired immediately.
Your brakes are a critical safety system. If you notice any of these signs, call our brake shop in Bullhead City, AZ, as soon as possible to have your brakes inspected.
Why does my car shake when I brake?
There are a few reasons why your car might shake during braking. The most common culprits are:
- Warped brake rotors: Your brake rotors are the discs that your brake pads clamp onto to slow your car. Repeated heavy braking can cause excessive heat, warping the rotors. This uneven surface causes shaking when you apply the brakes.
- Worn or dirty brake pads: If your brake pads are very worn or have collected dirt and debris, they might not grip the rotor evenly. This creates a pulsating effect that you'll feel as shaking.
- Tire problems: Unbalanced tires or worn suspension components can make the shaking worse, especially at higher speeds. However, you'll likely feel these issues even when you're not braking.
- Faulty brake calipers: These components squeeze your brake pads against the rotors. If they're sticking or not working correctly, they may apply uneven pressure, causing vibration.
Shaking brakes can be a safety issue. Let our brake shop examine them so we can pinpoint the exact issue and make sure your brakes are working properly.
How long does it take a shop to do a brake job?
The time needed for a brake job varies depending on the specific work required and how busy the shop is.
Here's what you can expect:
A simple brake pad replacement is usually the quickest fix, often taking about an hour per axle (two wheels). If your rotors need work, the brake job can take longer, potentially a few hours.
Major repairs involving brake lines, calipers, or the master cylinder can take significantly longer, sometimes requiring most of a workday.
How often should brakes be serviced?
Brake wear depends on factors such as your driving habits, the type of terrain you usually drive on, and the type of car you have. There are, however, some general guidelines to consider.
First, you should get your brakes inspected every 10,000 miles or during each oil change. This lets the mechanic catch problems early.
Second, around every 30,000 miles, it's wise to have the calipers and brake pads removed for a thorough cleaning and a detailed inspection of all the components.
These are starting points. Aggressive driving, frequent stop-and-go traffic, or mountainous terrain can require more frequent brake service. Always follow your car manufacturer's recommended maintenance schedule.